Tecnichal data
| Type of accessory/spare part | Mechanical locking |
| Width | 58 mm |
| Height | 183 mm |
| Depth | 34 mm |
| Type of switch | Slamlock electrical, single key, primary trapped |
| Operating temperature | -20 ðC |
| Pollution degree | 3 |
| Current, min | 5mA @ 5V DC |
| Utilization category | AC-15 (Ue/Ie: 240V/3A, 120V/6A) DC-13 (Ue/Ie: 24V/2A |
| Thermal current (Ith) | 10 A |
| Rated impulse voltage (Uimp) | 2500 V |
| Auxiliary contacts | 1 NO |
| Insulation voltage | Rated 500V |
| Color | Red/Stainless |
| Electrical life cycle | Dependant on load |
| Safety contacts | 2 NC positive break |
| Switching current, max | 500V/500VA @ voltage |
| Torque settings, max | Terminal screws: 1.0 Nm |
| Key code 1 position 1 | Code 1 position 1 – code R |
| Key code 1 position 2 | Code 1 position 2 – code A |
| Weight | SSE: 1.17 kg (2.6 lb) |
| Operating radius, min | 175 mm (6.88 inch) (60 mm (2.36 inch) with flexible actuator) |
| Mounting | SSS: 4 x M5 counterbored from top or 4 x M5 from underside with nuts |
| Key condition | 2 NC + 1 NO break before make, Key free to release flexible actuator |
| Features | Electrical safety contacts combined with trapped key/enforced sequence feature, Most of unit constructed from 316L stainless steel, Selection of actuator types available, Single or dual key versions available, Direct drive operation, Replaceable code barr |
| Actuator travel for positive opening | 5 mm |
| Torque to key | 14 Nm |
| Break contact force, min | 12 N |
| Relative humidity | 95 % |
| Releasable load, max | 100 N |
| Shear force to key | 15.1 kN |
| Holding force, max | 2000 N |
| Actuation speed, max | 1 m/s |
| Mechanical life operations | 200000 |
| Conduit entry | 3 x M20 |
| Actuation frequency, max | 2 cycle/s |
| Actuator material | Stainless Steel |
| Safety contact gap | >2 x 2 mm (0.07 inch) |
| Case material | 316L Stainless Steel, UL approved glass-filled Polyester |
