Tecnichal data
| Voltage type for actuating | AC |
| With transformer | No |
| Suitable for emergency stop | Yes |
| External reset possible | Yes |
| With fuse | No |
| Rated control supply voltage at AC 60 Hz | 115 V |
| Release class | CLASS 20 |
| Overload release current setting | 9 A |
| Type of motor starter | Reversing starter |
| Continuous current rating | 27 A |
| Service limit current rating | 32 A |
| Circuit closing inrush current peak including offset, max | 288 A |
| Load voltage | 200 to 575V |
| Heat dissipation | 5.9 W |
| Coil operating limits | 85 to 110 % |
| Operating volt amperes burden | Sealed: 29VA, 60 Hz coils |
| Hp rating | 7.5 Hp @ 230V load voltage, 3-phase |
| Temperature compensated overload protection | Yes |
| Coordination class according to IEC 60947-4-3 | Class 2 |
| Type of electrical connection of main circuit | Screw connection |
| Type of electrical connection for auxiliary- and control current circuit | Screw connection |
| Width | 14 mm |
| Height | 18 mm |
| Depth | 6.37 mm |
| Degree of protection (NEMA) | 1 |
| Number of auxiliary contacts, max | 8 |
| Mechanical life operations | 1.0E7 |
| Operating time, drop-out | 14 ms |
| Operating time, pick-up | 22 ms |
| Enclosure type | NEMA 1 general purpose |
| Material housing | Steel |
| Required torque on power terminal wire clamps and pressure connectors or lugs | 20 lb.inch |
| Auxiliary contact material | Silver |
| Type of power terminal | Saddle or wire clamps |
| Wire size | For power terminals: 14…8 AWG |
| Power contact material | Silver alloy |
| Requirements for sizing of wire | All wire rated 167 ðF (75 ðC) or higher must be sized per the local electrical code for 167 ðF (75 ðC) wire |
| NEMA size | Size 1 |
| Operating temperature | -25 ðC |
| Operating position | Vertical |
| Altitude | 10000 feet before derating |
| Overload relay | E1 plus overload relay, full load current adjustment range 9…45 A |
| Corrosion-resistance | All metal parts are treated for corrosion-resistance |


