Home Fotoelektrik Sensörler MAX48N-22V10AA0125 – 1107420 🔍 MAX48N-22V10AA0125 – 1107420 ✉ Teklif Al Teklif Al Stok kodu: 1107420 Kategoriler: Fotoelektrik Sensörler Marka: SICK Açıklama Tecnichal data Features Items supplied Accessories not included with delivery, please order seperately. Performance Type 48 mm installation housing – IN cylinder mounting Pressure pipe/End cap 10 mm / Flat Connection type Male connector, M12 type S (20×20 mm), 4-pin Direction of connection Radial Measuring range Measured values Positioning Position (F.S.) 0 mm … 125 mm Null zone 30 mm Damping zone 36 mm Operating conditions Fluid temperature –30 °C … +95 °C Air humidity 90 % (Condensation not permitted) Operating pressure PN 400 bar Supply voltage 24 V DC (8 … 32 V DC) Switch-on time < 250 ms Switch-on current Typ. 5.0 A / 50 µs Measuring frequency (internal) 2 ms Transmission rate (cycle time) Steady Accuracy Setpoint tolerance ≤ ± 1 mm Resolution Typ. 0.1 mm (noise-free) Hysteresis ± 0,1 mm Repeatability Typ. ± 0.2 mm Linearity Typ. ± 0.25 mm (measuring range 50 to 500 mm) Typ. ± 0.04% F.S. (measuring range from 500 to 2,500 mm) Temperature drift Warming up phase Typ. ≤ ± 0.25 mm (2 min) In the operational status Typ. ± 0.25 mm (measuring range 50 to 500 mm) Typ. ± 0.04% F.S. (measuring range from 500 to 2,500 mm) MTTFd 69 years (EN ISO 13849-1) Interfaces Communication interface Analog Communication Interface detail Voltage Voltage output 0.5 V DC … 4.5 V DC Electrical data Connection type Male connector, M12 type S (20×20 mm), 4-pin PIN assignment 1=V DC; 2=n.c.; 3=GND; 4=SIG Electrical operation Supply voltage 24 V DC (8 … 32 V DC) Residual ripple < 1% S-S Power consumption ≤ 0.75 W Current consumption ≤ 30 mA Load resistance RL ≥ 10 kΩ Overvoltage protection during power-up (60 s) ≤ 36 V at all poles during power-up (60 s) ≤ 48 V To GND during power-up (60 s) Reverse polarity protection ≤ 36 V (at all poles) (ISO 16750-2) Insulation resistance Riso ≥ 10 MΩ, 60 s (ISO 16750-2) Dielectric strength 500 V DC, 0 V DC (60 s) to housing (RISO ≥ 1 MΩ) (ISO 16750-2) Short-circuit protection VS – GND on housing Mechanical data Dimensions Housing 48 mm, 48f7 for IN cylinder mounting – cylinder bore hole 48H8 Ø pressure pipe 10 mm Ø O-ring 40.87 mm x 3.53 mm Ø support ring 42.6 mm x 48 mm x 1.4 mm M12 flange M12 flange type S: DM 20×20 mm – hole pattern 14 mm (EN 61076-2-101) Wire length 60 mm Material Housing Stainless steel 1.4305 (AISI 303) Pressure pipe Stainless steel 1.4404, AISI 316L O-ring NBR 70 Support ring PTFE M12 male connector Glass fiber reinforced polyamide, nickel-/gold-plated brass contacts M12 flange Nickel-plated brass with O-ring (NBR) Strands PVC Ambient data EMC EU Directive 2014/30 / EU CE marking Generic standards EN 61000-6-2/61000-6-3 Agricultural and forestry machinery EN ISO 14982 Transient pulses ISO 7637-2/ISO 16750-2 ESD (air and contact discharge) ISO 61000-4-2 ISO 10605 Vibration Sine 20 g (sine) / 55 … 2,000 Hz / 3×24 h (IEC 60068-2-6 Fc) Sine over noise 18 g (r.m.s) / 10 … 2,000 Hz / 3×36 h (IEC 60068-2-80 Fi) Broadband noise (resonance peaks removed) 20 g (r.m.s) / 10 … 2,000 Hz / 3×48 h (IEC 60068-2-64 Fh) Pressure load Operating pressure PN 400 bar Overload pressure Pmax = PN x 1.2 480 bar Test pressure Pstat = PN x 1.5 600 bar Temperature and air humidity Storage –20 °C … +65 °C Operation (electronics) –40 °C … +105 °C Maximum air humidity 90 % (Condensation not permitted) Enclosure rating Housing IP67 (EN 60529) M12 male connector IP69k (ISO 20653) Classifications eCl@ss 5.0 27270705 eCl@ss 5.1.4 27270705 eCl@ss 6.0 27270705 eCl@ss 6.2 27270705 eCl@ss 7.0 27270705 eCl@ss 8.0 27270705 eCl@ss 8.1 27270705 eCl@ss 9.0 27270705 eCl@ss 10.0 27270705 eCl@ss 11.0 27270705 eCl@ss 12.0 27274304 ETIM 5.0 EC002544 ETIM 6.0 EC002544 ETIM 7.0 EC002544 ETIM 8.0 EC002544 UNSPSC 16.0901 41111613 İlgili ürünler 45LSP Optical Fork Sensor, 50 mm Sensing Gap, 10–30V DC Operating Voltage, Light or Dark Operate Selectable, 3-pin Pico QD, NPN Output Type – 45LSP-2LNA2-P3ALLEN BRADLEYFotoelektrik Sensörler ₺3.200,00 Ürüne Git Endüstriyel bağlantı kablosu – 42CA-U2MPA-A2ALLEN BRADLEYFotoelektrik Sensörler ₺3.200,00 Ürüne Git Photoelectric Accessories, Mounting, Kit – 129-135ALLEN BRADLEYFotoelektrik Sensörler ₺3.200,00 Ürüne Git Endüstriyel bağlantı kablosu – 42CA-U2MNB-A2ALLEN BRADLEYFotoelektrik Sensörler ₺3.200,00 Ürüne Git
Tecnichal data Features Items supplied Accessories not included with delivery, please order seperately. Performance Type 48 mm installation housing – IN cylinder mounting Pressure pipe/End cap 10 mm / Flat Connection type Male connector, M12 type S (20×20 mm), 4-pin Direction of connection Radial Measuring range Measured values Positioning Position (F.S.) 0 mm … 125 mm Null zone 30 mm Damping zone 36 mm Operating conditions Fluid temperature –30 °C … +95 °C Air humidity 90 % (Condensation not permitted) Operating pressure PN 400 bar Supply voltage 24 V DC (8 … 32 V DC) Switch-on time < 250 ms Switch-on current Typ. 5.0 A / 50 µs Measuring frequency (internal) 2 ms Transmission rate (cycle time) Steady Accuracy Setpoint tolerance ≤ ± 1 mm Resolution Typ. 0.1 mm (noise-free) Hysteresis ± 0,1 mm Repeatability Typ. ± 0.2 mm Linearity Typ. ± 0.25 mm (measuring range 50 to 500 mm) Typ. ± 0.04% F.S. (measuring range from 500 to 2,500 mm) Temperature drift Warming up phase Typ. ≤ ± 0.25 mm (2 min) In the operational status Typ. ± 0.25 mm (measuring range 50 to 500 mm) Typ. ± 0.04% F.S. (measuring range from 500 to 2,500 mm) MTTFd 69 years (EN ISO 13849-1) Interfaces Communication interface Analog Communication Interface detail Voltage Voltage output 0.5 V DC … 4.5 V DC Electrical data Connection type Male connector, M12 type S (20×20 mm), 4-pin PIN assignment 1=V DC; 2=n.c.; 3=GND; 4=SIG Electrical operation Supply voltage 24 V DC (8 … 32 V DC) Residual ripple < 1% S-S Power consumption ≤ 0.75 W Current consumption ≤ 30 mA Load resistance RL ≥ 10 kΩ Overvoltage protection during power-up (60 s) ≤ 36 V at all poles during power-up (60 s) ≤ 48 V To GND during power-up (60 s) Reverse polarity protection ≤ 36 V (at all poles) (ISO 16750-2) Insulation resistance Riso ≥ 10 MΩ, 60 s (ISO 16750-2) Dielectric strength 500 V DC, 0 V DC (60 s) to housing (RISO ≥ 1 MΩ) (ISO 16750-2) Short-circuit protection VS – GND on housing Mechanical data Dimensions Housing 48 mm, 48f7 for IN cylinder mounting – cylinder bore hole 48H8 Ø pressure pipe 10 mm Ø O-ring 40.87 mm x 3.53 mm Ø support ring 42.6 mm x 48 mm x 1.4 mm M12 flange M12 flange type S: DM 20×20 mm – hole pattern 14 mm (EN 61076-2-101) Wire length 60 mm Material Housing Stainless steel 1.4305 (AISI 303) Pressure pipe Stainless steel 1.4404, AISI 316L O-ring NBR 70 Support ring PTFE M12 male connector Glass fiber reinforced polyamide, nickel-/gold-plated brass contacts M12 flange Nickel-plated brass with O-ring (NBR) Strands PVC Ambient data EMC EU Directive 2014/30 / EU CE marking Generic standards EN 61000-6-2/61000-6-3 Agricultural and forestry machinery EN ISO 14982 Transient pulses ISO 7637-2/ISO 16750-2 ESD (air and contact discharge) ISO 61000-4-2 ISO 10605 Vibration Sine 20 g (sine) / 55 … 2,000 Hz / 3×24 h (IEC 60068-2-6 Fc) Sine over noise 18 g (r.m.s) / 10 … 2,000 Hz / 3×36 h (IEC 60068-2-80 Fi) Broadband noise (resonance peaks removed) 20 g (r.m.s) / 10 … 2,000 Hz / 3×48 h (IEC 60068-2-64 Fh) Pressure load Operating pressure PN 400 bar Overload pressure Pmax = PN x 1.2 480 bar Test pressure Pstat = PN x 1.5 600 bar Temperature and air humidity Storage –20 °C … +65 °C Operation (electronics) –40 °C … +105 °C Maximum air humidity 90 % (Condensation not permitted) Enclosure rating Housing IP67 (EN 60529) M12 male connector IP69k (ISO 20653) Classifications eCl@ss 5.0 27270705 eCl@ss 5.1.4 27270705 eCl@ss 6.0 27270705 eCl@ss 6.2 27270705 eCl@ss 7.0 27270705 eCl@ss 8.0 27270705 eCl@ss 8.1 27270705 eCl@ss 9.0 27270705 eCl@ss 10.0 27270705 eCl@ss 11.0 27270705 eCl@ss 12.0 27274304 ETIM 5.0 EC002544 ETIM 6.0 EC002544 ETIM 7.0 EC002544 ETIM 8.0 EC002544 UNSPSC 16.0901 41111613
