Tecnichal data
| Type of accessory/spare part | Mechanical locking |
| Width | 59 mm |
| Height | 203.3 mm |
| Depth | 34 mm |
| Type of switch | Slamlock solenoid primary trapped |
| Operating temperature | -20 ðC |
| Pollution degree | 3 |
| Ingress protection rating | IP67 |
| Ambient temperature | -10 ðC |
| Current, min | 5 mA @ 5V DC |
| Utilization category | DC (250V, 0.5 A, 24V, 2 A) |
| Thermal current (Ith) | 10 A |
| Auxiliary contacts | 1 NO |
| Rated impulse withstand voltage (Uimp) | 2500 V |
| Insulation voltage | Rated 500V |
| Color | Red/stainless |
| Electrical life cycle | Dependant on load |
| Safety contacts | 2 NC positive break |
| Switching current, max | 500V/500VA @ voltage |
| Torque settings, max | Terminal screws: 1.0 Nm |
| Key code 1 position 1 | Code 1 position 1 – code 0 |
| Key code 1 position 2 | Code 1 position 2 – code R |
| Weight | SSE: 1.17 kg (2.6 lb) |
| Operating radius, min | 175 mm (6.88 inch) (60 mm (2.36 inch) with flexible actuator) |
| Mounting | SSS: 4 x M5 counterbored from top or 4 x M5 from underside with nuts |
| Key condition | 24V 2 NC & 1 NO key free to release standard actuator |
| Features | Electrical safety contacts combined with trapped key/enforced sequence feature, Most of unit constructed from 316L Stainless Steel, Selection of actuator types available, Single or dual key versions available, Direct drive operation, Replaceable code barr |
| Actuator travel for positive opening | 5 mm |
| Torque to key | 14 Nm |
| Break contact force, min | 12 N |
| Relative humidity | 95 % |
| Releasable load, max | 100 N |
| Shear force to key | 15.1 kN |
| Holding force, max | 2000 N |
| Actuation speed, max | 1 m/s |
| Mechanical life operations | 200000 |
| Conduit entry | 3 x M20 |
| Actuation frequency, max | 2 cycle/s |
| Actuator material | Stainless Steel |
| Safety contact gap | >2 x 2 mm (0.07 inch) |
| Case material | 316L Stainless Steel, UL approved glass-filled Polyester |
