Tecnichal data
| With integrated auxiliary switch | No |
| With integrated under voltage release | No |
| Rated short-circuit breaking capacity lcu at 400 V, AC | 70 kA |
| Rated permanent current Iu | 100 A |
| Rated operating voltage | 690 A |
| Type of control element | Other |
| Overload release current setting | 40 A |
| Type of electrical connection of main circuit | Screw-/spring clamp connection |
| Rated motor current | 100 A |
| Insulation voltage (Ui) | Rated 1000V per IEC |
| Electrical life cycle | 8000 @ 415V AC |
| Adjustable rated motor current | I1 = 0.4…1 x In (40…100 A) |
| Trip class | Class 3E, 5E, 10E, 20E (approx. 2…20 s) |
| Voltage for reverse-fed circuit breaker, max | 600V AC max. per UL/CSA, 600V AC max. per IEC |
| Rated ultimate short-circuit breaking capacity (Icu) | IEC 60947-2: 70 kA @ 500V DC, 3 poles in series |
| Rated service short-circuit breaking capacity (Ics) | IEC 60947-2: 100% @ 690V AC |
| Interrupting rating | NEMA, UL 489, CSA C22.2 no. 5: 65 kA @ 480V AC, 50/60 Hz |
| Instantaneous current | Adjustable from 6…13 x In (100 A maximum rated motor current) |
| Number of poles | 3 |
| With thermal protection | Yes |
| Phase failure sensitive | Yes |
| Switch off technique | Thermomagnetic |
| Rated impulse voltage withstand (Uimp) | 8 kV |
| Control element | Toggle |
| Unbalace detection (50 % of I1) | ON or OFF |
| Interrupting rating/breaking capacity | High break |
| Width | 4.13 mm |
| Depth | 82.5 mm |
| Height | 6.3 mm |
| Frame size | 250 A |
| Device construction | Built-in device fixed built-in technique |
| Degree of protection (IP) | IP20 |
| Weight | 5.5 lb |
| Mechanical life operations | 25000 /h |
| Protection type | Thermal/magnetic- adjustable thermal/fixed magnetic TMD |
| Factory option | 1 NO/NC auxiliary, 250V AC/DC |
| Wire temperature rating | Al or Cu 75 ðC |
| Operating temperature | -13 ðF |
| Storage temperature | -40 ðF |
| Ambient temperature without derating | 104 ðF [40 ðC] |
